Scandia Plastics is a custom plastic extruder of rigid plastic tubing and profiles. We have been satisfying customers for over 40 years in a wide range of extruded applications.
No. Scandia only extrudes rigid, hollow plastic tubes and profile shapes.
Scandia extrudes from a wide variety of thermoplastic materials. Some of the common materials extruded at Scandia are: ABS, Thermoplastic Rubber (TPR), Butyrate, Noryl, Polycarbonate (PC), Polyethylene (HDPE), Polypropylene (PPO), Polystyrene (HIPS), Polysulfone (PSU), Propionate, Rigid Vinyl (PVC), Static-Dissipative resins (ESD), Radel and Ultem.
Scandia Plastics can extrude plastic tubes and profiles ranging in size from approximately 1/8-inch O.D. to a maximum 8-inch O.D. with wall thickness from .015 to heavy wall. Check out our Process Capabilities section for more information.

As a manufacturer we do require minimum order quantities.

We offer a wide selection of plastic core tubes ranging in size from 1/4″ to 8″ diameters with wall thickness as needed. Core tubes are normally extruded from Polystyrene (HIPS) or Polyethylene (HDPE) and cut to your specified lengths from 6″ to 8 feet. A strip of starter tape may also be applied to the length of your core tube if desired.
Scandia Plastics has a full service machine shop on site capable of making all tooling necessary for your custom extrusion. In addition Scandia Plastics with its experience in high tech design programs can assist you in fine- tuning your extrusion project.
Yes, Scandia Plastics has the capabilities to print part numbers, recycle symbols, etc. on most tubes and profiles.
Having 12 extrusion lines and a full-service machine shop allows Scandia Plastics to keep lead times to a minimum. Normally 2 – 5 weeks can be achieved after receipt of your order.